How to Install Windows 7 From USB Without Any Software in Simple and Easy Steps

How to Install Windows 7 From USB Without Any Software in Simple and Easy Steps

ALL YOU NEED IS
1.Thumb drive having 4 GB of capacity.
2. Win 7 dvd

Step-1: Plug-in your USB flash drive and backup all the

existing data in it.

Step-2: Open the command prompt. If you are using

Windows 7/Vista then open it with administrator rights*.

* Goto Start -> All Programs -> Accessories -> Right-click on Command Prompt” and

select “Run as Administrator”.

Step 3: In the command prompt, type in the following

command:

DISKPART

This will start the Microsoft DiskPart utility.

Now issue the following command:

LIST DISK

This will show you a list of available disks on your system.

Disk 0 is usually the hard disk. In my case, Disk 5 is the USB

drive (this can be a different one in your case). Now issue the

command as shown below:

SELECT DISK 5

NOTE: In the above command, 5 is the USB drive number on

my system. If you have a different number on your system,

then you need to replace 5 with that number.

Step-4: Now issue the following list of commands one by one

as shown below:

CLEAN

CREATE PARTITION PRIMARY

SELECT PARTITION 1

ACTIVE

FORMAT FS=NTFS QUICK

ASSIGN

EXIT

Minimize the command prompt and proceed to the next step.

Step 5: Insert the Windows 7/Vista installation disc and note

down the “drive letter” of your DVD drive. In my case, it is

“H:”. Now type the following list of commands as shown

below:

H: CD BOOT

CD BOOT

BOOTSECT.EXE /NT60 M:(NOTE: M: is your USB drive letter)

EXIT

Step-6: Copy the contents of your Windows 7/

Vista installation disk into the USB flash drive.

That’s it! Your USB stick is now ready to boot and install the

OS for you. Don’t forget to enable the “USB Boot” option and

change the “boot priority to USB device from hard disk” in

your BIOS settings.

Thankyou@dattu